[11:24] <Schultz> ok... I've been looking more an more into the 1.1.x firmwares... I've never used one, I've always stuck to the 1.0.x firmware series... but I'd like to try a 1.1.x firmware.  Seems like mostthings are the same, except for the h[2] and h[1] config variables... the h[2] I can understand, but as usual there isn't any good info about what the heck h[1] means anywhere... can anyone give me anexplanation? :)
[11:30] <Sambas_> h[1] is reference tooth table, how many cylinders and what kind of trigger you have?
[11:30] <Schultz> 6 cyl, 60-2
[11:30] <Sambas_> with camsync?
[11:31] <Schultz> no... not currently.. maybe in the future
[11:31] <Sambas_> wasted spark?
[11:31] <Schultz> yup

[11:33] <Sambas_> h1 would be in your case h[1]=00 40 20 00 40 20 xx xx in desimals
[11:33] <Schultz> great... now can you explain to me how you got that? :P

[11:34] <Schultz> do these numbers (in dec.) actually represent the teeth on the wheel?
[11:34] <Sambas_> 00 is first trigger event after missing teeth
[11:35] <Sambas_> yes they are teeth on the wheel

[11:35] <Schultz> so 00=tooth 0 on the weel (ie. the first missing tooth correct?)
[11:36] <Sambas_> it's the trigger tooth, like missing+triggertooth

[11:38] <Schultz> Sambas_: but trigger tooth 00 doesn't make any 'real' sense
[11:39] <Sambas_> well it just means first trigger event where counting starts

[11:43] <Schultz> Sambas_: ok so tooth 00 is the first trigger event, so knowing that since I know the next trigger tooth is 20, that's why you got 20 and then 40 and restarted @ 00 again after that? since I'm only using 3 ign event's due to wasted spark?
[11:48] <Sambas_> Schultz: that's right

[11:49] <Schultz> alright... that makes sense to me... but I don't see how it would change if I had sequential ign.?  do you cut the trigger events in half?
[11:49] <@Jorgen__> No, you must always have all of them.
[11:49] <@Jorgen__> ...in 1.1.x
[11:49] <Schultz> no by half I mean, 00 10 20 30 40?
[11:50] <Sambas_> nope

[11:50] <@Jorgen__> 00 20 40 00 20 40
[11:50] <@Jorgen__> But rather 00 40 20 00 40 20

[11:51] <Schultz> and if I added cam sync?

[11:52] <Schultz> Sambas_: so why did you ask me if I was wasted spark and if I was using cam sync?  I thought it would change :P
[11:56] <Schultz> Jorgen__: the array you posted would be good for the config right?  but in MT it would be 00 20 40 00 20 40?
[11:59] <Sambas_> Schultz: because with cam sync you should actually use h1 = 00 100 80 60 40 20 xx xx
[12:00] <Sambas_> in megatune same way, h1 is travelled backwards
[12:00] <Schultz> ah ok... that all makes perfect sense now :)